Colortran I 48 User Manual download pdf (Page 79)

Chapter 4: Console System Setup

Software Version 3.05

If the Hand Held Remote is enabled while it is not connected to the console, a

message appears on the console display to indicate that the Hand Held Remote

is not connected. The message can be cleared with the [CLEAR] key. The

Setup display shows that the Hand Held Remote is enabled (On). The console

can then be addressed by the Hand Held Remote when it is later connected to

the console.

ADVANCED TOPICS: For more information on the Hand Held

Remote, see Appendix C, Hand Held Remote.

MIDI Interface

Software Version 2.04 and later support both MIDI Show Control commands

and general MIDI data messaging. Commands can be accepted and

transmitted to execute playback commands.

If your console was originally shipped with software Version 1.04 or lower, a

hardware modification is required to allow the MIDI functions to operate

correctly. (You will see a message on your monitor that indicates this if your

console is one of these initial units.) Even if your console requires the

hardware modification, you may still enable the MIDI functions on your

console under the (SYSTM SETUP) soft key, and see how the console shows

incoming and outgoing MIDI commands in the Playback display. If you

require the MIDI hardware change for your console, please contact Colortran

Field Service at (800) 959-6004.

ADVANCED TOPICS: For more information about MIDI functions,

see Appendix D, MIDI Interface.

Reference By Name

You can use the (REF BY NAME) soft key in the System Setup to allow

reference to cues, groups, subs, and effects by their names as well as their

numbers. Press the (REF BY NAME) soft key to enable/disable the feature. By

disabling the Reference By Name feature, you can prevent your Bump buttons

from going into alpha mode when other keys are pressed ([SUB], [GROUP],

etc.).

ADVANCED TOPIC: See Chapter 11, Names.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 293 294

No comments

Colortran I 48 User Manual Page 79