Colortran I 48 User Manual download pdf (Page 17)

Software Version 3.05

CHAPTER 1:

Setting Up

Your Console

Step 1: Unpacking

Carefully unpack your console from its carton. Underneath the console, you

will find:

?? This manual

?? A 7' AC power cable

?? One 3.5", 1.44MB floppy show storage disk

?? One 3.5", 1.44MB floppy disk containing the console operating program

?? One 3.5", 1.44MB floppy disk containing the Help file

?? 1 or 2 gooseneck Worklight fixtures (if the option was ordered)

In a separate shipping container, you will find the console monitor. Carefully

inspect all items for evidence of shipping damage. If any damage is noted, call

the shipping company for an inspection. It is recommended that you keep the

shipping containers in case you need to transport your console in the future.

Step 2: Set Up

Place your console on a sturdy horizontal surface with at least 6" (152mm) of

clearance behind the console for cables and for proper ventilation. The

environment should be dust-free with an ambient temperature of 40?F (4?C) to

90?F (32?C) and a relative humidity between 8% to 80% without condensation.

WARNING!! Do not run the console while it is in a road case, or

damage may occur.

Do not expose console to rain or moisture, or

damage may occur.

Place your monitor on a sturdy surface near the console in accordance with the

instructions provided by the monitor manufacturer.

Step 3: Power Connections

Power Supply Specifications: The console has an auto-ranging

power supply designed to operate on AC power at any nominal voltage between

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 293 294

No comments

Colortran I 48 User Manual Page 17